The latest inkjet printers in the market are truly spectacular in every way possible. Printers are a necessity in every office and even in many households. These high functional inkjet printers are great in terms of productivity. With high rate printing speed, these printing devices produce superior quality printouts.

An inkjet printer when subjected to too much printing jobs and used for a long period of time, will show deterioration in its normal activity. Many problems may arise which include – blurred printouts, Ghosting issues, paper-jam, half and double printing, spooler issues and so on. Solving these issues is not that easy. That’s why a good inkjet printer tech supports will always advise you to follow certain precautionary steps beforehand in order to avoid such problematic technical glitches.

To help you get started, here are some common practices that you might consider doing to keep your printer in good condition.

  1. Always Keep Your Printer Clean

If you consult any inkjet printer technical support, they will say that dust and dirt is the biggest enemy of your inkjet printer. Your printer gets severely affected by loose paper fibers and paper dust. And if you use cotton rag papers, it will also affect your printer. printer cleaning

To keep your printer clean from all these dust, you must use a microfiber cloth to wipe the surfaces of the printers thoroughly. In case you are currently not using a printer, then keep it protected with dust covers.

Also, another trick to clean a printer is to use a slightly damped cloth to remove any dirt accumulated near the plastic areas. You need to clean the rubber rollers of your printer at least once a year. You can also use a rubber roller restorer.

  1. Check the Printer’s Nozzles

printer nozzle checkingIf you are facing any sort of print quality issues with your printers, then one of the main reasons for this is a faulty nozzle. In such cases, you need to check your nozzle and keep it clean. Do this and you will have a top class printing experience.

  1. Do Not Clean the Printer Head Too Much

One thing you must remember that cleaning the printer’s head excessively will not make your printer super functional. A printer head should only be cleaned when the nozzles are blocked. Excessive cleaning will only lead to a waste of ink.

In certain cases when even after three head clean cycles, if the nozzles remain clogged or the situation is getting worse then you must look for some other solutions and probably call an inkjet printer tech support online. Also, you should know that such difficulties will occur if air enters the lines. The perfect way to deal with this anomaly is to keep printing with the problems color. This will flush out the ink through the printer’s head and ultimately the printer will restore back to its normal functionality.

  1. Select a proper refillselect proper refill

While buying an ink cartridge for your inkjet printers, never compromise on the cost. A low-quality ink cartridge can have a serious impact on the hardware of the printer and your inkjet printer will produce poor printouts. If you are not sure about which cartridge will best suit your printer then talk to an expert from online inkjet printer tech support.

  1. Be very careful while replacing the cartridges

Before you replace the cartridges of your printer, you must read the manual that is provided to you. Follow the instructions written there and then only replace the cartridge with extra care. While doing this, avoid touching the bottom of the printer as it will spoil the print quality. Also, replace the cartridge before it dries up.

  1. Turn off the printer after using it

after using turn off the printerYou must know that a lot of heat is generated from a printer. If you are not using a printer for a while then you need to turn it off. When the printer remains on, the header will dry up the ink cartridge; as a result, the printer’s header will clog. Additionally, in case you have kept the printer on for a long time, it can damage other parts of the printer as well.

Follow these pro-tips and you will have minimal technical glitches with your printer.

Leave a Reply

Your email address will not be published.

You may use these <abbr title="HyperText Markup Language">HTML</abbr> tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>


Hi, How Can We Help You?